Topographic analysis of the surface of commercially pure titanium implants. Study using scanning electron microscopy

Amanda Hora da Paixão, José Rodrigo Mega Rocha, Bruno Botto, Dario Augusto Oliveira Miranda, Sandra de Cássia Santana Sardinha

Objective: This study aims at carrying out a descriptive comparative analysis of four types of surfaces of commercially pure titanium implants by means of scanning electron microscopy (SEM). Material and Methods: Four implants of different commercial brands were used, as follows: Conexão – Sistemas de Próteses (Prosthesis system) and Straumann. The samples had their surfaces machined by means of acid etching, anodization (Conexão) and blasting followed by acid etching (Straumann) techniques, and were divided into four groups with one implant each. The areas of thread top and valley were determined for SEM analysis at different magnifications. Results: All samples assessed presented characteristics of surface rugosity, including the machined surfaces. The implants treated by anodization and blasting followed by acid etching had a greater surface pattern in comparison to the implants treated by acid etching due to their greater degree of rugosity. Conclusion: Surface treatment influences surface macro structure. Surfaces treated by anodization and blasting followed by acid etching presented a surface pattern that provides a greater area for bone apposition.

Keywords: Titanium implants. Surface treatments. Scanning electron microscopy.

How to cite: Paixão AH, Rocha JRM, Botto B, Miranda DAO, Sardinha SCS. Topographic analysis of the surface of commercially pure titanium implants. Study using scanning electron microscopy. Dental Press Implantol. 2013 Apr-June;7(2):49-58.

Monday, December 30, 2024 16:42