In vitro study of shear bond strength in direct bonding of orthodontic molar tubes

Célia Regina Maio Pinzan VERCELINO, Arnaldo PINZAN, Júlio de Araújo GURGEL, Fausto Silva BRAMANTE, Luciana Maio PINZAN

Objective: Although direct bonding takes up less clinical time and ensures increased preservation of gingival health, the banding of molar teeth is still widespread nowadays. It would therefore be convenient to devise methods capable of increasing the efficiency of this procedure, notably for teeth subjected to substantial masticatory impact, such as molars. This study was conducted with the purpose of evaluating whether direct bonding would benefit from the application of an additional layer of resin to the occlusal surfaces of the tube/tooth interface. Methods: A sample of 40 mandibular third molars was selected and randomly divided into two groups: Group 1 - Conventional direct bonding, followed by the application of a layer of resin to the occlusal surfaces of the tube/tooth interface, and Group 2 - Conventional direct bonding. Shear bond strength was tested 24 hours after bonding with the aid of a universal testing machine operating at a speed of 0.5mm/min. The results were analyzed using the independent t-test. Results: The shear bond strength tests yielded the following mean values: 17.08 MPa for Group 1 and 12.60 MPa for Group 2. Group 1 showed higher statistically significant shear bond strength than Group 2. Conclusions: The application of an additional layer of resin to the occlusal surfaces of the tube/tooth interface was found to enhance bond strength quality of orthodontic buccal tubes bonded directly to molar teeth.

Keywords: Tooth bonding. Shear strength. Molar tooth.

How to cite: Vercelino CRMP, Pinzan A, Gurgel JA, Bramante FS, Pinzan LM. Estudo in vitro da resistência ao cisalhamento da colagem direta de tubos ortodônticos em molares. Dental Press J Orthod. 2011 May-June;16(3):60-2.

Friday, December 27, 2024 14:38